York TIWM006B22S, Installation And Maintenance Manual

Page: 20 / 50

16
P5417090
NOTE:
If left side piping access is selected, the
condensate pipe outlet should be on the left
side, and the mounting plate downslope should
be adjusted to left side. It does not change the
mounting plate downslope to the left side.
5.2.6 Position of Piping Connection
Piping can be installed from the indoor unit in the following directions: the right rear side, the left rear side,
the left bottom side, and the left side of the unit.
Unit: Inch (mm)
MBH
Dimension
6 and 8 12 15 18 to 30
a 25-1/8 (638) 25-7/8 (657) 36-7/16 (925) 36-7/16 (925)
b 15-9/16 (395) 15-9/16 (395) 13-3/4 (350) 13-3/4 (350)
c 17-11/16 (450) 17-11/16 (450) 16-1/8 (410) 16-1/8 (410)
d 22-3/8 (568) 22-3/8 (568) 21-5/8 (550) 21-5/8 (550)
e 1-3/4 (45) 1-3/4 (45) 2 (51) 2 (51)
f 4-3/16 (107) 4-3/16 (107) 4-3/4 (120) 4-3/4 (120)
g 2-9/16 (65) 2-9/16 (65) 3-1/8 (80) 3-1/8 (80)
h 1/4 (6.35) 1/4 (6.35) 1/4 (6.35) 3/8 (9.52)
j 1/2 (12.7) 1/2 (12.7) 1/2 (12.7) 5/8 (15.88)
Refrigerant Liquid Pipe Connection
Exterior Contour for Indoor Unit
Hole for Piping and Wiring
Hole for Piping
Condensate Pipe Connection VP16
(Outer Diamater ɸ 7/8 (22))
c
b
d
e
f a
g
g
e
( ɸh With Flare Nut )
Refrigerant Gas Pipe Connection
( ɸ j With Flare Nut )
(1) Direction of Piping Installation
Determine the direction of the piping connection according to the layout of the installation site.
In the case that the pipe is connected toward the side, remove the "knock-out" panel on the side for
the piping. Do this before the unit is mounted onto the wall.
Right Rear Side Piping
Left Bottom Side Piping
Left Side Piping
Left Side of Indoor Unit
Right Side of Indoor Unit
Left Rear Side Piping
(2) Piping Installation
Exterior Contour for Indoor Unit
Hole for Piping and Wiring
Hole for Piping
Condensate Pipe Connection VP16
(Outer Diamater
ɸ 7/8 (22))
c
b
d
e
f
a
g
g
e
( ɸh With Flare Nut )
Refrigerant Gas Pipe Connection
( ɸ j With Flare Nut )
Refrigerant Liquid Pipe Connection
TIWM006B22S to TIWM012B22S TIWM015B22S to TIWM030B22S
View from Front Side for Indoor Unit View from Front Side for Indoor Unit
For the pipe installation embedded in the wall
Unit: inch (mm) Unit: inch (mm)
• For Left Side Piping
With the appropriate cutting tool, remove the
left-side "knock-out" panel and smooth away
any sharp edges. Do this before the unit is
mounted onto the wall.
NOTE:
Taking out of refrigerant pipe from the right
bottom side and right side of the unit are not
available.
Left Side Cover
Knife for Plastic
Cut this portion.