York MAXE OPTIVIEW YK, Service Instructions Manual

Page: 180 / 180

Service Information Letters / Bulletins
26
General
Beginning March 2003, an enhanced Flash Memory Card will be supplied in all new production YK chillers. These
cards are backward compatible to all previous YK chillers and are available from the Baltimore Parts Distribution
Center as replacement parts. The enhancements are outlined below.
The versions and part numbers are applied as follows:
•
NEMA 1-4 chillers C.MLM.01.08.105A (p/n 031-01797-001)
•
CE chillers C.MLM.01.08.206A (p/n 031-01797-002)
Chiller Style/Compressor Setpoint
In previous Flash Memory Card version, this setpoint key (located on OPERATIONS Screen), was labeled “CHILL-
ER MOD” . For clarity, this setpoint key is now labeled “CHILLER STYLE/COMPRESSOR” (English only).
The functionality of this setpoint has changed slightly as follows:
The previous choice of “Style F chiller/G, H compr” is now “Style F chiller/G, H5-8 compr”. The previous choice
of “Style F chiller/J compr” is now “Style F chiller/J, H3 compr”.
The Chiller Style/Compressor selections are shown below.
Chiller Style/
Compressor
Proxmity
Sense
Oil
Heater
Output*
Level
Control
Period
Default
Flow Switch
“Oil-Variable Speed
Pump-Pressure Setpoint
Not Achieved” Threshold*
“Style C, D & E/
G, H & J Compr”
Probe TB1-34 3.5 sec
Digital
(Paddle Type)
35 PSID
“Style E/
P Compr”
Limit Switch TB1-64 10.0 sec
Digital
(Paddle Type)
25 PSID
“Style F/
G & H5-8 Compr”
Limit Switch TB1-64 3.5 sec
Programmable
(Analog or Digital)
35 PSID
“Style F/
J & H3 Compr”
Probe TB1-64 3.5 sec
Programmable
(Analog or Digital)
35 PSID
“Style F/
P Compr”
Limit Switch TB1-64 10.0 sec
Programmable
(Analog or Digital)
25 PSID
* Not applicable to Style C and earlier chillers
SI0062 - SOFTWARE ENHANCEMENTS EFFECTIVE MARCH 2003
Tele. 800-861-1001
www.york.com
P.O. Box 1592, York, Pennsylvania USA 17405-1592 Subject to change without notice. Printed in USA
Copyright © by York International Corporation 2002 ALL RIGHTS RESERVED
Form 160.54-M1 (503)
Supersedes: 160.54-M1 (402)