York HA090 Technical Manual Download Page 134

Page: 134 / 222

036-21328-003-D-0206

Unitary Products Group

GUIDE SPECIFICATIONS

MODELS HA300,

HB360,

HB480 and HB600

CONDENSING UNITS

THE INSTALLER SHALL:

Furnish York air-cooled condensing units or equivalent
in accordance with the performance schedule shown on
the plans, and

nstall each unit as shown on the plans in accordance

with:

The manufacturers recommendations and

All applicable national and local codes

EACH UNIT SHALL be:

ETL and cETL approved.

Completely assembled for one-piece shipping and rig-
ging.

Leak pressure and functionally tested at the factory to
assure a trouble-free start-up after installation.

Covered by a 1-year limited parts warranty on the com-
plete unit.

n current production with published literature available

to check performance, limitations, specifications, power
requirements, dimensions, operation and appearance.

EACH UNIT SHALL HAVE:

A steel angle frame to provide the rigid support required
for shipping, rigging and years of dependable operation.

Zinc-coated steel that has been finished by a powder
paint process to provide a long lasting, quality appear-
ance.

Removable panels for easy access to all internal compo-
nents during maintenance and service.

THE DIMENSIONS OF EACH UNIT

shall not exceed those

specified on the plans.

EACH COMPRESSOR

shall be mounted on isolators to min-

imize the transmission of vibration.

ALL CONDENSER COILS SHALL:

Be draw thru

Be constructed of copper tubes arranged in staggered
rows and mechanically expanded into aluminum fins.

THE CONDENSER FAN MOTOR(S) SHALL:

Be directly connected to the condenser fans.

Have permanently lubricated ball bearings.

Have inherent overload protection.

Motors shall be three phase.

The propeller-type condenser fans shall be arranged for
vertical discharge of the condenser air.

THE WIRING FOR EACH UNIT SHALL INCLUDE:

A crankcase heater (one per compressor)

All 24-volt temperature control circuit.

Both high and low pressure cutouts.

Solid-state or internal line break compressor motor pro-
tection.

Condenser fan motor control to assure stable operation
at ambient temperatures down to 40 F.

THE REFRIGERANT PIPING

of each system shall include:

A filter-drier shipped for field installation.

A liquid line, moisture-indicating, sight glass shipped for
field installation.

http://www.rezine.net

Page 134

Summary of Contents for HA090































































































































































































































Search results

Summary of Contents for HA090

Reviews:

Related manuals for HA090

Brands by name

Popular brands

York HA090, Technical Manual

Search results

Summary of Contents for HA090

Reviews:

Related manuals for HA090

Brands by name

Popular brands