JOHNSON CONTROLS
109
SECTION 6 – OPERATION
FORM 155.32-ICOM1.EN.GB
ISSUE DATE: 10/13/2017
6
FAILURE AND ALARM SCREEN
LD20282
FIGURE 41 -
FAILURE AND ALARM SCREEN
LD20285
This screen displays failure indications (time-outs, op-
eration interlock, overcooled refrigerant, over and un-
der temperatures, and problems with the unit's pumps)
and system alarms.
The failure light in the upper right corner is red. The
alarm light is orange.
Failure
When a failure occurs, an alarm sounds (buzzer). The
type of failure button lights in the Failure section of
the screen. Press the
BUZZER STOP
button to turn
off the alarm sound. This can be done even before the
failure is addressed. Turning off the buzzer does NOT
fix the problem.
Press the lit failure button to access an on-screen han-
dling guide for each item. An on-screen guide is avail-
able for each item in the Failure and the Alarm sec-
tions. See an example to the right.
LD21302
Press the
CLOSE
button to return to the Failure and
Alarm screen.
After fixing the problem, press the
FAILURE RESET
button to reset the lighted failure button.
If you press the
FAILURE RESET
button before fix-
ing the problem, the lighted failure button will not go
out, and the buzzer will sound again.
