YOKOGAWA ZR22S, User Manual

Page: 149 / 206

<10. Other Functions>
10-5
10.2 Trend Graph
Press the [Graph display] key in the Basic panel display to switch to the graph display.
This will help grasp the measured-value trend. Touching anywhere on the graph display will
return to the Basic panel display. To set the Trend graph display, follow the steps in Subsection
10.2.1.
10.2.1 Setting Display Items
(1) Press the [Setup] key in the Basic panel display to display the Execution/Setup display.
Select the “Maintenance” in the Execution/Setup display.
(2) Select the “Display setup” in the Maintenance display.
(3) Select the “Trend graph” in the Display setup display. The Trend graph display shown in
Figure 10.4 appears.
(4) Select the “Parameter: Oxygen” in the Trend graph display. Then select the desired display
item shown in Table 10.2.
Table 10.2 Trend Graph Display Items
Selected item Description
Oxygen concentration Oxygen concentration graph under measurement
Output 1 If this equipment is for the oxygen analyzer, the trend graph will be an
oxygen concentration graph.
Output 2 If this equipment is for the oxygen analyzer, the trend graph will be an
oxygen concentration graph.
Enter
Parameter:
Oxygen

Sample interval: 3 0 s
Scale Oxygen

Upper limit: 2 5 . 0 % O
2

Lower limit: 0 . 0 % O
2
Trend graph
F10-4E.ai
Figure 10.4 Trend Graph Display
10.2.2 Sampling Interval
To plot a graph, set the sampling period for the measurement data.
This graph allows the plotting of 60 data items on one division on the time axis. So, if you set
a ten-second sampling interval, one division corresponds to 600 seconds (Figure 10.5). The
allowable sampling intervals range from 1 to 30 seconds. If you set a one-second sampling
interval, the axis of the abscissas then corresponds to five minutes.
If you set it to 30 seconds, the axis of the abscissas then corresponds to 150 minutes.
IM 11M13A01-02E