YOKOGAWA YPP6300, Instruction Manual

Page: 32 / 100

Model YPP6300 Pulse Input Rate/Totalizer Instruction Manual
32
Display Parameter Action/Setting Description
Inp 2
Input 2 Calibrate input 2 signal or program input 2
value (up to 32 points)
Dis 2 Display 2
Program display 2 value (up to 32 points)
Error
Error Error, calibration not successful, check
signal or programmed value
dsplay Display Enter the Display menu
big Big display
Press Enter to assign the Main display
parameter (default: PV or rate)
Little Little display
Press Enter to assign the small display
parameter (default: total)
d-Inty Display
intensity
Set display intensity level from 1 to 8
RELaY Relay
Enter the Relay menu
Assign
Assignment Assign relays to rate, total, or grand total
Asign1 Assign 1
Relay 1 assignment
rATE
Rate Assign relay to rate
totAL Total Assign relay to total
G total
Grand total Assign relay to grand total
RLY 1 Relay 1 Relay 1 setup
Act 1
Action 1 Set relay 1 action
Auto Automatic Set relay for automatic reset
A-nman Auto-manual
Set relay for automatic & manual reset
any time
LatCH
Latching Set relay for latching operation (relays
assigned to rate)
Lt-CLr
Latching-
cleared Set relay for latching operation with
manual reset only after alarm condition
has cleared (relays assigned to rate)
Altern Alternate
Set relay for alternation control (relays
assigned to rate)