YOKOGAWA YPP6300, Instruction Manual, Page: 79 / 100

Model YPP6300 Pulse Input Rate/Totalizer Instruction Manual
79
Meter Copy Function (
Copy
)
The Copy function is used to copy (or clone) all the settings from one
meter to other meters requiring exactly the same setup and
programming (
i.e . type of input, scaling, decimal point, filter, gate, etc.).
Warning!
Only the YPPA1200 meter copy cable must be used for
meter-to-meter interfacing. The YPPA1200 is a special
eight-conductor flat cable with two wires swapped.
Using standard CAT5 or other cable will cause
damage to both meters.
Figure 20: Meter Copy Connection
Copy Function Requirements
To successfully copy settings from one
meter to another, both meters must have:
1. Same software version
2. Same baud rate setting
See Determining Software Version ,
page 83 for instructions.
YPPA1200 Meter Copy Cable