YOKOGAWA YPP6060, Instruction Manual, Page: 97 / 104

Model YPP6060 Dual-Input Process Meter Instruction Manual
97
Display Parameter Action/Setting Description
display channel C on the small display
Lit Hi Max on little
display Assign digital input to display max of
channel A on the small display
Lit HL Max/min little
display Assign digital input to toggle max/min of
channel A on the small display
LitHLC Max/Min little
display Assign digital input to toggle max/min of
channel C on the small display
Lit LC Min on little
display Assign digital input to display min of
channel C on the small display
Lit Lo
Min on little
display Assign digital input to display min of
channel A on the small display
Little Little display Press Enter to assign the small display
parameter (default: Ch-B)
locd
Locked Enter password to unlock meter
Lt-CLr Latching-
cleared Set relay for latching operation with manual
reset only after alarm condition has cleared
mA 4-20 mA
Set meter for 4-20 mA input
mAn
Manual Press Enter to manually control relays or
analog output operation
math Math Select channel C math function
mAx Maximum Program maximum mA output allowed
mbus
Modbus Select to display Modbus input or to assign
Modbus input as the analog output source
menu Menu button Assign digital input to Menu button
min Minimum Program minimum mA output allowed
No PtS Num of points Set meter for 2 to 32-point linearization
O Hold
Relays output
hold Assign digital input or function keys to hold
all relay states
OFF Off Disable relay and front panel status LED,
turn relays off, program off time delay
OFF 1 Off 1
Set relay 1 Off time delay (1-8)
on On
Enable fail-safe operation, turn relays on,
program on time delay
O-rang Overrange Program mA output for display overrange
Out 1 Output 1 Program output 1 value (e.g. 4.000 mA)
Out 2 Output 2 Program output 2 value (e.g. 20.000 mA)
pass Password
Enter the Password menu
Pass 1
Password 1 Set or enter Password 1 (Allows use of the
F1–F3 function keys)
Pass 2 Password 2 Set or enter Password 2 (Allows use of the
F1–F3 function keys and changing the
set/reset points)
Pass 3 Password 3 Set or enter Password 3 (Restricts all
programming & F1–F3 keys)
prog Program
Enter the Program menu