YOKOGAWA YPP6060, Instruction Manual, Page: 29 / 104

Model YPP6060 Dual-Input Process Meter Instruction Manual
29
Display Parameter Action/Setting Description
SCALE B Scale B
Enter the Scale menu for channel B
Cal A
Calibrate A Enter the Calibration menu for channel A
Cal B Calibrate B Enter the Calibration menu for channel B
Inp 1
Input 1 Calibrate input 1 signal or program input 1
value
Dis 1 Display 1
Program display 1 value
Inp 2
Input 2 Calibrate input 2 signal or program input 2
value (up to 32 points)
Dis 2 Display 2
Program display 2 value (up to 32 points)
Error
Error Error, calibration not successful, check signal
or programmed value
dsplay
Display Enter the Display menu
big
Big display Press Enter to assign the big display
parameter (default: Ch-A)
Little
Little display Press Enter to assign the little display
parameter (default: Ch-B)
D Ch-A Display Ch-A Assign display to channel A
D Ch-B
Display Ch-B Assign display to channel B
D Ch-C Display Ch-C Assign display to channel C (math)
D Ab Display AB
Alternate display of channel A & B
D AC
Display AC Alternate display of channel A & C
D BC Display BC Alternate display of channel B & C
D AbC
Display ABC Alternate display of channel A, B, & C
D set1
Display Set 1 Displays relay 1 set point. Repeats for
relays 1-8.
D Hi-A
Display Hi A Display high value of channel A
D Lo-A Display Lo A Display low value of channel A
D HL-A
Display
Hi/Low A Alternate between high/low value of
channel A
D Hi-B Display Hi B Display high value of channel B
D Lo-B
Display Lo B Display low value of channel B