YOKOGAWA YPP6060, Instruction Manual, Page: 31 / 104

Model YPP6060 Dual-Input Process Meter Instruction Manual
31
Display Parameter Action/Setting Description
LatCH Latching
Set relay for latching operation
Lt-CLr
Latching-
cleared Set relay for latching operation with manual
reset only after alarm condition has cleared
Altern
Alternate Set relay for pump alternation control
SAmpl Sample Set relay for sample time trigger control
Off Off
Turn relay off
FaiLSF
Fail-safe Enter Fail-safe menu
FLS 1 Fail-safe 1 Set relay 1 fail-safe operation
on
On Enable fail-safe operation
FLS 2
Fail-safe 2 Set relays 2-8 fail-safe operation
DeLAY Delay Enter relay Time Delay menu
DLY 1
Delay 1 Enter relay 1 time delay setup
On 1 On 1 Set relay 1 On time delay
OFF 1 Off 1
Set relay 1 Off time delay
DLY 2
Delay 2 Enter relays 2-8 time delay setup
break Loop break Set relay condition if loop break detected
ignore
Ignore Ignore loop break condition
(Processed as a low signal condition)
On On Relay goes to alarm condition when loop
break detected
Off
Off Relay goes to non-alarm condition when
loop break detected
Aout
Analog output Enter the Analog output scaling menu
Dis 1 Display 1 Program display 1 value
Out 1
Output 1 Program output 1 value (e.g. 4.000 mA)
Dis 2
Display 2 Program display 2 value
Out 2 Output 2 Program output 2 value (e.g. 20.000 mA)
pass
Password Enter the Password menu
Pass 1 Password 1 Set or enter Password 1
Pass 2 Password 2
Set or enter Password 2