13-13
IM WT3001E-51EN
Cycle-by-Cycle Measurement
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
13.4 Executing the Cycle-by-Cycle Measurement
Procedure
START STOP
REMOTE
CAL
SENSOR RATIO
MEASURING
RMS
MEAN
DC
RMEAN
CURRENT RANGE
VOLTAGE RANGE
MEASURING
RMS
MEAN
DC
RMEAN
ALL
INPUT INFO.
LOWER ITEM
LOWER FORM
ALL
USER SET
DISPLAY
ITEM & ELEMENT
2
3
4
COMPEN
ELEMENT
ELEMENT
1
WIRING
MODE
AUTO
MODE
AUTO
EXT SENSOR
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
RESET
SET
PAGE
PAGE
Cursor keys
To exit the menu during
operation, press
ESC
located
above the soft keys.
In the procedural explanation
below, the phrase “press the
cursor keys
” may be used.
This phrase refers to the
procedures for selecting items
and entering values and
character strings. For details
on the procedures, see section
3.14 in the
User’s Manual
, IM
WT3001E-01EN
.
Function select keys
Check that the cycle-by-cycle measurement status is indicating Reset. If not, set
the cycle-by-cycle measurement status to Reset according to the procedure in
“Resetting the Cycle-by-Cycle Measurement” on page 13-16.
1.
Set the measurement range, scaling, etc. (see chapter 4 in the
User’s Manual IM
WT3001E-01EN
).
• Starting the Cycle-by-Cycle Measurement
2.
Press
FORM
to display the CBC Form menu.
3.
Press the
Start
soft key to start the cycle-by-cycle measurement. The cycle-by-
cycle measurement status indicates Start.
