YOKOGAWA WT3002E, User Manual

Page: 125 / 256

7-22
IM WT3001E-51EN
7.5 Selecting the PLL Source
Procedure
START STOP
REMOTE
CAL
MOTOR
SET
CURSOR NULL
MENU STORE SET
MENU
LOWER ITEM LOWER FORM ALL USER SET
DISPLAY ITEM & ELEMENT
RESET SET
PAGE PAGE
SCALING
HRM SET MEASURE SYNC SOURCE
AVG LINE FILTER
FREQ
FILTER
FILE
PRINT MISC
STORE IMAGE SAVE
HELP
NUMERIC WAVE
OTHERS
ITEM FORM
U / I / P
WP/q/
TIME
USER ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
Cursor keys
To exit the menu during operation, press ESC located above the
soft keys.
In the procedural explanation below, the phrase “press the
cursor
keys ” may be used. This phrase refers to the procedures for
selecting items and entering values and character strings. For
details on the procedures, see section 3.14 in the User’s Manual,
IM WT3001E-01EN .
1.
Press
HRM SET
to display the Harmonics menu.
2.
Press the PLL Source Up Exec or the PLL Source Down Exec soft key to select
the PLL source. The selected PLL source is displayed in the upper right corner of
the screen at PLL Source.
• Press the PLL Source Down Exec soft key to switch the selected PLL source as follows:
U1 –> I1 –> U2–>I2 and so on.
• Press the PLL Source Up Exec soft key to switch the selected PLL source as follows:
I2 –> U2 –> I1 –> U1 and so on.
Normal measurement
mode
Wide bandwidth
harmonic measurement
mode
IEC harmonic
measurement mode