11-16
IM WT3001E-51EN
11.8 Displaying the Power Spectrum on the Split
Screen
Procedure
START STOP
REMOTE
CAL
SENSOR RATIO
MEASURING
RMS
MEAN
DC
RMEAN
CURRENT RANGE
VOLTAGE RANGE
MEASURING
RMS
MEAN
DC
RMEAN
ALL
INPUT INFO.
LOWER ITEM
LOWER FORM
ALL
USER SET
DISPLAY
ITEM & ELEMENT
2
3
4
COMPEN
ELEMENT
ELEMENT
1
WIRING
MODE
AUTO
MODE
AUTO
EXT SENSOR
NUMERIC
WAVE
OTHERS
ITEM
FORM
U / I / P
WP/q/
TIME
USER
ELEMENT
UPDATE
RATE
HOLD
SINGLE
INTEG
LOCAL
SHIFT
RESET
SET
PAGE
PAGE
Cursor keys
To exit the menu during
operation, press
ESC
located
above the soft keys.
In the procedural explanation
below, the phrase “press the
cursor keys
” may be used.
This phrase refers to the
procedures for selecting
items and entering values
and character strings. For
details on the procedures,
see section 3.14 in the
User’s
Manual
, IM WT3001E-01EN
.
1.
Press
FORM
to display the FFT Form menu.
If the FFT display is at the lower section of the screen on the split display, press
SHIFT+FORM (LOWER FORM)
.
2.
Press the
Format
soft key to display the FFT Format menu.
3.
Press one of the keys from
Single
or
Dual
to select the number of windows.
Explanation
The screen can be evenly divided and the waveforms can be assigned to the divided
windows. Select the number of divisions of the screen from the choices below.
• Single: 1 window
• Dual: 2 equally divided windows
The number of displayed points in the vertical direction of one divided window varies
depending on the number of divisions as follows:
• Single: 432 points
• Dual: 216 points
