YOKOGAWA WT3000E User Manual Download Page 84

Page: 84 / 256

5-15

IM WT3001E-51EN

Ethernet Communications (Option)

Explanation

The LPR client function of this instrument can be used to output screen images to a
network printer.

• Printer Server

• Specify the printer server by entering the IP address.
• If you are using DNS (see section 5.2), you can specify the server by name.

• Printer Name

Enter the name of the output destination printer on the network.

• Selecting the Output Command

Select the output command type from the choices below.

• BJ
• PCL5
• LIPS3

• Turning ON/OFF Color Printing

You can select whether to output the image in color when the output command type is

BJ, or PCL5.

• ON

The displayed screen image can be output to a printer in color (256 colors).

• OFF

The displayed screen image can be output to a printer in black and white.

• Setting Comments

Same as the explanation given in “File Name and Comment” in section 9.3 in the

User’s Manual IM WT3001E-01EN

Note

• The LPR client function cannot be used under the following cases.

• When this instrument is performing file operations (see chapter 9 in the

User’s Manual

IM WT3001E-01EN

• When this instrument is being accessed by a PC or workstation on the network (FTP

server function, see section 5.6).

• To use the LPR client function, you must configure TCP/IP (see section 5.2) in advance.
• Output is possible to printers that support the TCP/IP protocol.

Index

5.4 Printing Screen Images on a Network Printer

Summary of Contents for WT3000E

































































































































































































































































Search results

Summary of Contents for WT3000E

Reviews:

YOKOGAWA WT3000E, User Manual, Page: 84 / 256

Search results

Summary of Contents for WT3000E

Reviews: