YOKOGAWA WT3000E User Manual Download Page 181

Page: 181 / 256

10-13

IM WT3001E-51EN

aveform Computation (Option)

Index

10.6 Waveform Computation Function Specifications

Computation Function

Item

Specifications

Computed source

Voltage, current, and active power of each input element; torque (analog input) and speed (analog

input) of motor input (option); and motor output

Equation

Two equations (MATH1 and MATH2)

Operator

+, –,

, /, ABS (absolute value), SQR (square), SQRT (square root), LOG (natural logarithm),

LOG10 (common logarithm), EXP (exponent), NEG (negation), AVG2, AVG4, AVG8, AVG16,

AVG32, AVG64 (exponential average).

Measurement Function

Item

Specifications

Sampling clock

Fixed to 200 kHz

Display update

Data update in computing time

Functional Limitations

Item

Specifications

Display

Trend display, bar graph display, vector display, and FFT display are not allowed.

Harmonic measurement

Not allowed

Equation for apparent

power and reactive power

Type3 not selectable.
If waveform computation mode is enabled while Type3 is set, Type1 is automatically selected.

Integration

Not allowed

Trigger Mode

OFF not selectable.
If waveform computation mode is enabled is enabled while OFF is set, Auto is automatically

selected.

Store

Not allowed

Synchronized measurement Not allowed
Auto print

Integration synchronization is not allowed.

Measurement Functions

Measurement is not allowed for measurement functions related to the functions above
that have limitations. For a list of measurement functions that cannot be measured, see
appendices 10 and 11 in the

User’s Manual IM WT3001E-01EN

Summary of Contents for WT3000E

































































































































































































































































Search results

Summary of Contents for WT3000E

Reviews:

YOKOGAWA WT3000E, User Manual, Page: 181 / 256

Search results

Summary of Contents for WT3000E

Reviews: