5-3
IM WT3001E-51EN
Ethernet Communications (Option)
1
2
3
4
5
6
7
8
9
10
11
12
13
Index
When Using Only DHCP
5.
Press the
cursor keys
to select DHCP.
6.
Press
SET
to select ON.
7.
Press the
cursor keys
to select DNS.
8.
Press
SET
. A DNS selection box appears.
9.
Press the
cursor keys
to select OFF.
When Using Only DNS
5.
Press the
cursor keys
to select DHCP.
6.
Press
SET
to select OFF.
• Entering the IP Address
7.
Press the
cursor keys
to select IP Address.
8.
Press
SET
. An IP address entry box appears.
9.
Press the
cursor keys
to enter the IP address of this instrument.
10.
Press
SET
or
ESC
to close the box.
11.
Enter all four octets of the
IP address
.
• Entering the Subnet Mask
Enter the subnet mask according to the system or network to which this instrument
belongs. If the subnet mask is not required, proceed to “Entering the Default Gateway.”
12.
Press the
cursor keys
to select Net Mask.
13.
Enter all four octets of the subnet mask of the network to which this instrument
belongs in the same fashion as the IP address.
• Entering the Default Gateway
Enter the default gateway according to the system or network to which this instrument
belongs. If the default gateway is not required, proceed to “Turning ON the DNS.”
14.
Press the
cursor keys
to select Gate Way.
15.
Enter all four octets of the default gateway of the network to which this instrument
belongs in the same fashion as the IP address.
5.2 Setting TCP/IP