YOKOGAWA WT3000E User Manual Download Page 210

Page: 210 / 256

12-9

IM WT3001E-51EN

Voltage Fluctuation and Flicker Measurement (Option)

Index

• Setting the Edition Number of IEC 61000-4-15

Press the

Flicker Settings

soft key to display the Flicker Settings dialog box.

Press the

cursor keys

to select 4-15 of IEC 61000 Edition.

Press

SET

to select Ed1.1 or Ed2.0 of IEC 61000-4-15.

When the measurement

method is Flicker

When the measurement

method is dmax

• Setting the Edition Number of IEC 61000-3-3

Press the

cursor keys

to select 3-3 of IEC 61000 Edition.

Press

SET

to select Ed2.0 or Ed3.0 of IEC 61000-3-3.

When the measurement

method is Flicker

When the measurement

method is dmax

• Setting the Measured Element

Press the

cursor keys

to select the element you want to set from Object.

Press

SET

. The button to the left of the selected element is highlighted indicating

that voltage fluctuation and flicker measurement will be performed on the element.
To remove the element from the measurement, press

SET

again.

The highlighting of the button is cleared.

When the measurement

method is Flicker

When the measurement

method is dmax

• Setting the Rated Voltage

• Selecting the Assignment Method of the Rated Voltage

10.

Press the

cursor keys

to select Un Mode.

11.

Press

SET

to select Auto or Set.

If you select Auto, proceed to step 16.
If you select Set, proceed to step 12.

12.3 Setting the Measurement Conditions

Summary of Contents for WT3000E

































































































































































































































































Search results

Summary of Contents for WT3000E

Reviews:

YOKOGAWA WT3000E, User Manual, Page: 210 / 256

Search results

Summary of Contents for WT3000E

Reviews: