YOKOGAWA WT3000E User Manual Download Page 249

Page: 249 / 256

13-15

IM WT3001E-51EN

Cycle-by-Cycle Measurement

Index

• Changing the Measurement Function

11.

Press the

U/I/P

S/Q/λ/φ

, or

FU/FI/η

function select key to select the displayed

measurement function.

Press the key corresponding to the measurement function you wish to display.

• The display switches each time the U/I/P key is pressed as follows: U, I, P, and original

display.

• The display switches each time the S/Q/λ/φ key is pressed as follows: S, Q, λ, and

original display.

• The display switches each time the FU/FI/η key is pressed as follows: Freq and original

display.

• Changing the Element/Wiring Unit

12.

Press

ELEMENT

to select the element/wiring unit.

• Changing the Element/Wiring Unit Collectively

13.

Press

SHIFT+ELEMENT (ALL)

. ALL LEDs illuminate, and the element/wiring unit

of all the displayed items of measured data list number 1 to 5 can be changed
collectively.

• Selecting the Displayed Items from the Menu

Press

ITEM

to display the CBC Items menu.

• Selecting the Data List to Be Changed

10.

Press the

List Item No.

soft key.

11.

Press the

cursor keys

to select the list number to be changed.

• Changing the Measurement Function

12.

Press the

Function

soft key to display the measurement function selection box.

13.

Press the

cursor keys

to select any of the measurement functions starting with Freq.

14.

Press

SET

. The symbol for the selected measurement function and the numeric

data are displayed in the data list to be changed.

• Changing the Element/Wiring Unit

15.

Press the

Element/Σ

soft key to display the element/wiring unit selection box.

16.

Press the

cursor keys

to select any of the elements/wiring units starting with Element1.

17.

Press

SET

. The symbol for the selected element number or wiring unit and the

numerical data are displayed in the data list to be changed.

• Page Scrolling the Screen (PAGE

Keys)

Press

PAGE

to scroll the page.

• Press PAGE to display the next page.
• Press PAGE to display the previous page.

13.4 Executing the Cycle-by-Cycle Measurement

Summary of Contents for WT3000E

































































































































































































































































Search results

Summary of Contents for WT3000E

Reviews:

YOKOGAWA WT3000E, User Manual, Page: 249 / 256

Search results

Summary of Contents for WT3000E

Reviews: