YOKOGAWA WT3000E User Manual Download Page 120

Page: 120 / 256

7-17

IM WT3001E-51EN

Harmonic Measurement in Normal Measurement Mode (Option)

Index

• Changing the Measurement Function

Press the

Time

, or

function select key to select the

displayed measurement function.

• When the display mode is set to Single List or Dual List, only the measurement

functions that contain harmonic order data can be selected. Press U/I/P to select U, I,

or P. Press S/Q/λ/φ to select S, Q, λ, φ, φU, or φI.

• Changing the Element/Wiring Unit

Press

ELEMENT

to select the element/wiring unit.

• Changing the Element/Wiring Unit Collectively

Press

SHIFT+ELEMENT (ALL)

. ALL LED illuminates, and the element/wiring

unit of all the displayed items on the displayed page can be changed collectively.
This completes the procedure for changing the displayed items using the function
select keys.

• Using the USER Key

By assigning measurement functions to the USER key, up to four measurement

functions can be directly displayed.

• Assigning Measurement Functions to the USER Key

Press

SHIFT+USER (USER SET)

to display the User Reserved menu.

Press any of the soft keys from

Function 1 to 4

to select the desired Function.

The measurement function selection box appears.

Press the

cursor keys

to select any of the measurement functions starting with

None.

Press

SET

. The symbol for the selected measurement function is displayed at the

highlighted position.

• Changing the Measurement Function with the USER Key

10.

Press

USER

to select the measurement function in the same fashion as step 3.

7.4 Changing the Displayed Items of Numeric Data

Summary of Contents for WT3000E

































































































































































































































































Search results

Summary of Contents for WT3000E

Reviews:

YOKOGAWA WT3000E, User Manual, Page: 120 / 256

Search results

Summary of Contents for WT3000E

Reviews: