4-24
IM 04P03B01-01E
4.17 Initializing the Settings
This section explains the details of initializing the recorder settings to their factory
default.
Be careful, because all settings except the date/time and the adjustment values of the
pen position and printer carriage position will be initialized. Basic Setting mode cannot be
entered when recording is in progress.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to display the
Basic Setting mode screen.
3.
Carry out the procedure shown in the figure below.
Press the
or
key to select the value.
If you press the
key, the operation is cancelled, and the display returns to a
higher level menu.
Select “YES” and press to execute
the initialization and return to Operation
mode.
Select the range to be initialized.
Select “INIT.”
(INIT)
(SETUP)
(NO)
Explanation
Initialization
Set (
):
Initializes the settings in Setting mode.
Setup (
): Initializes the settings in Basic Setting mode and Setting mode.
Items That Are Not Initialized
The following items are not initialized.
• Adjustment value of the pen position and the adjustment value of the printer carriage
position (Basic Setting mode)
• Date/Time (Setting mode)
