4-7
IM 04P03B01-01E
Setup Operations for Changing/Adding Functions (Basic Setting Mode)
4
4.6
Recording by Compensating for the Pen Offset
along the Time Axis (Pen Model)
The pen offset along the time axis (pen model) can be compensated. Basic Setting mode
cannot be entered when recording is in progress.
Procedure
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to display the
Basic Setting mode screen.
3.
Carry out the procedure shown in the figure below.
Press the
or
key to select the value.
If you press the
key, the operation is cancelled, and the display returns to a
higher level menu.
The settings are activated.
Select ON to record by compensating for
the pen offset along the time axis.
Select “POC.”
(POC)
(OFF)
(OK)
4.
If you are done, press the
key.
5.
To return to the Operation mode,
1. Press the
key, use the
or
key to select
, and press the
key.
2. Press the
or
key to select
or
, and press the
key.
Explanation
When pen offset compensation is turned ON, an asterisk is printed by the time on the
periodic printout.
Note
When pen offset compensation is enabled, all pens are aligned with the reference pen (pen that
is furthest to the back: pen 2 on the 2-pen model, pen 3 on the 3-pen model, and pen 4 on the 4-
pen model) for recording. When recording is started, only the reference pen moves until the
offset is compensated. This is not a malfunction.
