YOKOGAWA RAKD series User Manual Download Page 36

Page: 36 / 72

IM 01R01B30-00E-E 6th edition October 01, 2014 -00

<7. TECHNICAL DATA>

7-8

CONTROLLER (Option /R1 and R3)

Differential pressure controller for a constant flow at
fluctuations of the process pressure.
These are no valves to reduce the pressure.

Controller /R1

for liquids with variable inlet or

outlet pressure and for gases with variable inlet pressure
and constant back pressure.
-

Controller /R3

for gases with fluctuations of the back pressure.

Max. liquid flow

: 100 l/h

Max. gas flow

: 3250 l/h

Max. pressure

: 25 bar

Recommended differential pressure

: >400 mbar

Temperature range

: -25°C to +80°C

Materials

Table 5

Housing

Diaphragm

Springs

/R1 / /R3

CrNi-Steel

PTFE

CrNi-Steel

F2.EPS

l/h air at 20°C ; 1.013 bar abs.

Inlet pressure

Fig. 2 Diagram controller characteristic

COMPLIANCE WITH IEC 61508

RAKD with local indicator and standard or fail safe limit
switches (RAKD[][]-[][]SS-[][][][][]-T[][]NNN/K1…K10):

Suitable for application in safety functions up to and including
SIL2.

RAKD with valve and controller with local indicator and

standard or fail safe limit switches
(RAKD[][]-[][]SS-[][]V[][]-T[][]NNN/R[]/K1…K10):

Suitable for application in safety functions up to and including
SIL1. Reliability data available on request in FMEDA report.

COMPLIANCE WITH ISO 13849

For Safety Metrics acc. to ISO 13849-2 please refer to the
FMEDA report.

METROLOGICAL REGULATION IN CIS
AND EAC COUNTRIES

Russia, Kazakhstan, Uzbekistan, Ukraine and Belorussia are

members of CIS.

RAKD has “Pattern Approval Certificate of Measuring

Instruments” and is registered as a measuring instrument in

Russia, Kazakhstan, Uzbekistan.

Option /QR1 is for Russia.

Option /QR2 is for Kazakhstan.

Option /QR3 is for Uzbekistan.

For the Ukraine the test certificate of Rota Yokogawa is sufficient.

Therefore no special option exists.

For Belorussia Rota Yokogawa has no “Pattern Approval

Certificate”, that means devices which need primary verification

should be calibrated in Belarus by Belorussian special bod-

ies. Therefore no special option exists.

Russia, Kazakhstan and Belorussia are covered by EAC.

For export to CIS and EAC countries please contact your

Yokogawa representative.

Summary of Contents for RAKD series




































































Search results

Summary of Contents for RAKD series

Reviews:

YOKOGAWA RAKD series, User Manual, Page: 36 / 72

Search results

Summary of Contents for RAKD series

Reviews: