System Overview ProSafe-COM 3.00
5 of 49
About this manual
This System overview gives an introduction to ProSafe-COM. The booklet contains nine chapters, two
appendices and a glossary list. The basic structure of this booklet is as follows.
Chapter 2
An introduction to ProSafe-COM
Overview of the ProSafe family products and the main
characteristics of ProSafe-COM.
Chapter 3
ProSafe-COM functions
Detailed description of what data, in which way, can be exchanged
between ProSafe-COM and its surrounding systems.
Chapter 4
ProSafe-COM hardware
Description of available boards in ProSafe-COM.
Chapter 5
ProSafe-COM interfaces
Functions, hardware provisions and characteristics of:
•
Printer
•
User interface
•
V-net interface
•
OPC Interface
•
MODULE-BUS (M-BUS) / MODULE-NET (M-NET)
•
Ethernet interface
•
Serial interfaces
Chapter 6
Functions and hardware design
Explains in more detail how the ProSafe-COM functions are
implemented in the hardware.
Chapter 7
Redundant configurations
Function and characteristics of a redundant configuration.
Chapter 8
Time synchronisation
Function and realisation of time synchronisation.
Chapter 9
ProSafe-COM System Engineering Tool
A description of the tool COM SET, used for:
•
Engineering ProSafe-COM
•
Commissioning
•
Test and maintenance
Chapter 10
EmuTool I/O emulation tool
A description of the tool EmuTool, used for:
Emulating I/O
Appendix A
A description of how to integrate ProSafe-COM in the DCS system,
using tags.
This information is meant for the system engineer of the DCS
system that ProSafe-COM has to be integrated in.
Glossary
A glossary of used terms
Note
This
System overview
describes the maximally possible configurations of ProSafe-COM and the ProSafe
safety systems. However, in practice ProSafe-COM and the ProSafe safety systems do not need to have
all components described.
All Rights Reserved.
©
Copyright Yokogawa Europe Solutions B.V.
TI48J01A00-00E Oct 2010
