3. Cabling
3-1
TI 30A30A10-01EN
3. Cabling
This section describes how to cable the installed system equipment.
Connecting terminals for power, grounding, signal, and communication cables are shown
in figures.
3.1
Connecting cables to the cable entry
Cables should be connected with the enclosure through the cable entry at the bottom of the
enclosure. In order to prevent dust and water entry from outside the enclosure, cables should be
connected to the enclosure through cable glands or sealing modules.
F030101.ai
Figure Cable entry at the enclosure’s bottom
F030102.ai
Figure Insertion of power cable into the cable entry
n
Installation of Roxtec’s sealing module
When installing the sealing module into the sealing system frame, the specialized tool provided
by Roxtec enables the quick and safe on site installation. For details, refer to the Roxtec website.
Table Roxtec tools
Part names
Part numbers
PRE-COMP ECCENTRIC TOOL COMPACT
ICT0001000316
PRE-COMPRESSION WEDGE 40/60
5ICT000003691
Feb. 26, 2018-00
