2. Transportation, storage and installation
2-5
TI 30A30A10-01EN
2.3
Storage
The delivery date should be determined in accordance with your installation schedule. Avoid
storing products more than three months. If long-term storage more than three months cannot be
avoided, consult us in advance because it is necessary to provide waterproofing, condensation
prevention, and dustproofing measures as well as periodical inspections.
n
Storage condition
Store products without unpacking. Be sure to confirm that the crate is not damaged. To store
them after unpacking, be sure to take the precautions described below.
n
Location of storage
Store products in a warehouse or indoor facilities - never in an open-air location.
n
Storage environment
• Ambient Temperature for storage: -40 to 85 °C
• Avoid direct sunlight.
• Prevent wet with water.
• Prevent condensation.
• Do not store products where corrosive gas or salty air may be present.
SEE
ALSO
See “Section 1.1 Installation environment” for permissible temperature, humidity and temperature fluctuation of
storage area.
n
Storage of packed equipment
• Store crates horizontally.
• When loading crates on top of others, up to the following number of stacking stages is
allowable.
Table Allowable total number of stacking stages
Model
Allowable total number of stacking stages
A2NN70D, S2NN70D
Total 3 stages
A2NN60D, S2NN60D
Total 4 stages
A2CB60, S2CB60
Total 3 stages
• Make sure to provide good air circulation in the storage area and periodically inspect the
crates to keep them under proper conditions.
n
Storage of unpacked equipment
To store unpacked products without power connection, follow the specified environmental
requirements. If stored in a non-air-conditioned room, cover them with polyethylene or other
sheets for protection against dust and moisture. For moisture-proofing, place a sufficient amount
of Silica gel or other desiccating agent inside the covering and inspect replace from time to time.
Feb. 26, 2018-00
