YOKOGAWA GX70SM, User Manual, Page: 50 / 181

2-22
IM 04L57B01-01EN
2.6.4 Configuring the Universal Input and Built-in Humidity Sensor
This section explains how to configure the universal input and built-in humidity sensor
operation.
Procedure
1
On the main window, click Input settings .
The Input Configuration window appears.
2
For inputs 1 and 2, specify the Type, Range, Mode, Temperature, and Burnout
settings.
Item Description
Type Set the input signal type.
Skip: Not measured. The input is not saved in the logging data file (WLD file).
TC: Measures temperature using a thermocouple.
RTD: Measures temperature using an RTD.
Volt: Measured DC voltage.
GS: Measures 1-5V (4 to 20 mA) analog standard signal.
DI: Measures digital input (ON, OFF).
Range Sets the input signal range.
* See “Range Details.”
Mode Sets the reference junction compensation method of the thermocouple.
Internal: Uses the reference junction compensation function of the GX70SM.
External: Uses an external reference junction compensation function.
* You can set this when the type is set to TC.
Temperature When the mode is set to external, set the compensation temperature.
Burnout Sets burnout detection.
Off: Does not detect burnouts in the sensor.
Up: When the sensor burns out, the measured result is set to +over range.
Down: When the sensor burns out, the measured result is set to –over range.
* This appears when the range type is TC, RTD, or GS.
3
When a built-in humidity sensor (/RH option) is installed, set Input 3 (Humidity) to Off
(Skip) or On.
Off (Skip): Humidity is not measured. The input is not saved in the logging data file (WLD file).
On: Humidity is measured with the built-in humidity sensor (/RH option).
For details on the range, see section 1.2.2, “Measurement” on page 1-3.
Note
Inputs set to Skip are not saved in logging data files.
Operation complete
2.6 Configuring the Input Settings of the Wireless Input Unit