YOKOGAWA GX70SM, User Manual, Page: 101 / 181

3-17
IM 04L57B01-01JA
Reconfiguring and Managing the W
ireless Input Unit (GX/GP/GM)
1
2
3
4
5
6
App
Color
Setup Item Selectable Range or Options Default Value
Color 24 colors (red, green, blue, blue violet, brown,
orange, yellow-green, light blue, violet, gray,
lime, cyan, dark blue, yellow, light gray, purple,
black, pink, light brown, light green, dark gray,
olive, dark cyan, and spring green) and a user-
defined color (1 color)
—
Color
Set channel display colors. The colors apply to the trend display and bar graph display.
For instructions on how to set user-defined colors, see the following manual.
GX/GP User’s Manual Section 1.2.3, “Setting the Display”
GM User’s Manual “Operation example 2” in section 2.1.6, “Changing the Settings”
Zone
Setup Item Selectable Range or Options Default Value
Lower 0 to 95% 0
Upper 5 to 100% input 100
Lower and Upper
Set these values when you want to divide the waveform displays of channels into
separate zones so that waveforms do not overlap. Set the Lower and Upper positions as
percentages of the maximum display width. Set Lower to a value less than Upper , and set
the zone width ( Upper – Lower ) to be 5% or greater.
For zone display examples, see the following manual.
GX/GP User’s Manual Section 1.2.3, “Setting the Display”
GM User’s Manual Section 2.1.6, “Changing the Settings”
Scale (GX/GP only)
Setup Item Selectable Range or Options Default Value
Position Off/1/2/3/4/5/6/7/8/9/10 1
Division 4/5/6/7/8/9/10/11/12/C10 10
Position
Set the scale display position of the trend display. Set this to Off to not display scales.
Division
Set the number of divisions to make with the main scale marks.
C10: The scale is equally divided into 10 sections by main scale marks, and scale values are
indicated at 0, 30, 50, 70, and 100% positions.
For scale display examples, see the following manual.
GX/GP User’s Manual Section 1.2.3, “Setting the Display”
Bar graph
Setup Item Selectable Range or Options Default Value
Base position Lower, Center, Upper Lower
Division 4/5/6/7/8/9/10/11/12 10
Base position
Set the bar graph base position.
This setting is applied when you are displaying the current value on the scale as a bar graph
on the bar graph and trend displays.
3.4 Configuring the Settings for Wireless Input Unit Data