YOKOGAWA F3LR02-0N, User Manual

Page: 182 / 210

C6-8
IM 34M06H45-01E 7th Edition : Aug.30, 2019-00
C6.3 Procedure for Setting Condition Switches
To enable the Shutdown Output on Transmission Channel Error function, use the
following procedure.
C6.3.1 Setting Condition Switches

Setting the Condition Switches Located on the Right Side of the Module
FC0631.VSD
Condition switch:
To enable the Shutdown Output function, you need to
set the condition switch located on the right side of the
FA-bus Type 2 module installed in the subunit.
Set DIP switch 1 according to the table in Section C2.4,
"Components and Their Functions".
1
2
3
4 O
F
F
Figure C6.4 Condition Switches Located on the Right Side of the Module