1
1-25
IM 701730-51E
I
2
C Bus Signal Analysis Function
1.5
Analyzing/Searching Data
You can analyze the data of CH2 or CH4 by setting CH1 or CH3 to a clock channel. You
can also search analysis data that matches a data pattern or an indefinite data condition.
If analysis data that matches the specified condition is found, the zoom position moves to
the corresponding section, and the waveform of the data that is found is displayed in the
zoom waveform display frame.
Procedure
ACTION
DELAY
X - Y
MENU
MENU
PHASE
SEARCH
HORIZONTAL
VERTICAL
TRIGGER
TRIG D
HELP
ESC
SELECT
RESET
SIMPLE
MODE
POSITION
MATH
MISC
FILE
CLEAR
TRACE
HISTORY
MEASURE
SETUP
PRESET
DISPLAY
CURSOR
CH
1
CH
2
CH
3
CH
4
POWER
COPY IMAGE SAVE
SHIFT
ZOOM
GO/NO-GO
ENHANCED
ACQ
START/STOP
SNAP
SHOT
V DIV
TIME DIV
• To exit the menu during operation, press
ESC
located above the soft keys.
• In the procedural explanation below, the term
jog shuttle & SELECT
refers to the operation of
selecting/setting items and entering values using
the
jog shuttle
and
SELECT
and
RESET
keys.
For details on this operation, see sections 4.1 or
4.2 in the DL1700E Series User’s Manual.
• For a description of the operation using a USB
keyboard or a USB mouse, see section 4.3 in
the DL1700E Series User’s Manual.
1.
Press SHIFT+ZOOM (SEARCH). The SEARCH menu appears.
2.
Press the Type soft key. The Type menu appears.
3.
Press the I
2
C Bus soft key.
Setting the Analysis Conditions
4.
Press the Analyze Setup soft key. The Analyze Setup dialog box opens.
• Setting the Clock Channel
5.
Use job shuttle & SELECT to set the clock channel to CH1 or CH3 (Clock CH
box).
Setting the Level
6.
Use jog shuttle & SELECT to set the clock channel level (Level box).
Setting the Hysteresis
7.
Use jog shuttle & SELECT to set the hysteresis in the range of 0.3 to 4.0 [div]
(Hysteresis box).
Set the hysteresis in the range of
0.3 to 4.0 [div].
Set the clock channel to CH1 or
CH3.
Set the clock channel level.
