2-22
IM 701730-51E
Displaying the Analysis Data
• Scrolling the List
20.
Press the List soft key.
21.
Turn the jog shuttle to scroll the list left and right.
Up to 20 analysis data points are displayed at once in the order of occurrence. By
scrolling the list left and right using the jog shuttle, analysis data beyond 20 data points
can be displayed.
• Setting the Zoom Ratio
22.
Press the Z1 Mag/Z1 Position soft key to set the jog shuttle control to Z1 Mag.
23.
Turn the jog shuttle to set the zoom ratio
• Setting the Zoom Position
24.
Press the Z1 Mag/Z1 Position soft key to set the jog shuttle control to Z1
Position.
25.
Turn the jog shuttle to set the zoom position. When the center of the zoom box
moves to the waveform corresponding to the analysis data on the list, the
corresponding analysis data on the list is highlighted.
• Viewing the Details of the Analysis Data
26.
Press the Detail soft key. A Detail dialog box opens. The analysis data of the
same analysis number that is highlighted in the list in step 25 or step 29 is
displayed highlighted.
27.
Press the Hex or Bin soft key to select the notation used to display the analysis
data (Data1 and Data2).
If indefinite data exists in the data, “
∗
” is attached to the corresponding analysis data.
Analysis
number
Data2 value (hexadecimal or binary)
Data1 value (hexadecimal or binary)
CS signal status or the name of the
CS signal whose priority is high
Time from the reference point
28.
Press ESC. The Detail dialog box closes.
2.5 Analyzing/Searching Data
