4-17
IM AQ6360-02EN
Maintenance
1
2
3
4
5
App
Index
No. Message
Cause of Warning
306 Invalid data
Trace had no data when attempting to save it to memory or to write
it to FD/HDD.
307 Unsuitable Write item
All data items were OFF at execution of “WRITE DATA”.
320 Undefined variable
A command containing an undefined variable was executed.
321 Variable unit mismatch
The unit of each variable does not agree within a command
containing two or more variables.
322 Overflow
An overflow occurred in an arithmetic operation.
323 Undefined marker variable
A command containing a marker-value variable was executed when
no marker had been displayed.
324 Invalid marker variable
A command containing the corresponding variable was executed at
a time other than immediately after execution of a spectrum width
search, peak search, etc.
325 Undefined line number
GOTO command’s jumping destination is a number other than 1 to
200.
326 F1 greater than F2
F1>F2 when the “IF F1 ≤ @@@@@ ≤ F2” command was executed.
345 Option does not respond
No response from an external device.
346 Option is not connected
No external device is connected.
360 Storage full
No file can be created due to insufficient free space on the USB
storage medium.
361 USB Storage not inserted
USB storage medium not inserted.
362 USB Storage is write protected
The USB storage device is write protected.
363 USB Storage not initialized
USB storage not initialized. Or, it has been formatted in a format not
supported by this instrument.
364 Directory full
Directory is full, therefore no file can be created.
365 File not found
The specified file cannot be read because it has not been found. Or,
the file does not exist on the disk.
366 File is write protected
The file is specified to be read only, so that it cannot be rewritten or
deleted.
367 No data
No data to store.
368 File is not a trace file
A file cannot be read because it is not a trace file.
369 Illegal file name
A file cannot be saved due to an incorrect file name.
370 File type mismatch
Loading or saving the file is not possible because the specified type
of file does not match that of the command.
380 Undefined program
An attempt was made to run a program that is not defined.
381 Syntax error
Command incorrect (a program has been rewritten for some
reason).
382 Program nesting over
Nesting is not possible because the program nesting is already too
deep.
383 Program reentrant error GOTO
The destination of the GOTO command is set to its own program
number. This will create an infinite loop.
4.10 Warning Display Function
Summary of Contents for AQ6360
Page 16: ...xiv IM AQ6360 02EN ...
