manualshive.com logo in svg

YOKOGAWA AQ1210D, User Manual

Share
Download
YOKOGAWA AQ1210D User Manual Download Page 240

9-9

IM AQ1210-01EN

Managing Data

11

22

33

44

55

66

77

88

99

10

10

11

11

App

App

Index

Index

Loading Data

The following types of files can be loaded.

•  System setup

Extension

Description

CFG

System setup information file.

•  OTDR feature

Extension

Description

SOR

File in a format that conforms to Telcordia SR-4731 or Bellcore GR-196-CORE (must be a 

data file with measurement conditions that can be set on the instrument)

SOZ

Optical pulse waveform data (including the measurement conditions) for two wavelengths 

measured with the multi wavelength measurement feature.

This file can only be loaded into this instrument.

•  OTDR Smart Mapper

Extension

Description

SOR

File in a format that conforms to Telcordia SR-4731 or Bellcore GR-196-CORE (must be a 

data file with measurement conditions that can be set on the instrument)

SMP

Adapt Trace data measured from an optical pulse (including the measurement conditions).

•  Multi-Fiber Measurement Feature

Extension

Description

MPJ

Project information file for multi-core measurement. For details, see section 8.2.

Save Destination Drive

Select the destination drive from the following.

Display

Description

Internal Memory

Instrument internal memory

USB Memory 1

The first USB storage device connected to a type A USB port of the instrument

USB Memory 2

The second USB storage device connected to a type A USB port of the instrument

File Conditions

For details on the file name and comment feature, see section 2.4.

9.4  Saving and Loading Data

Summary of Contents for AQ1210D



































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands