8-28
IM AQ1210-01EN
Explanation
Saving the Project
The project file and measurement result files of each core can be compressed in MPZ format and
saved.
For the procedure to save files, see section 9.4.
Note
Decompressing MPZ Files
On the AQ7933 OTDR emulation software, run Utility > MPZ Converter. Select the source file (MPZ file) and
the conversion destination. An MPJ file and SOR files will be extracted.
AQ7933 (sold separately) is a PC software application for analyzing and creating reports of waveform data
measured by the instrument.
Loading a Project
An MPJ file created using the “Multi-Fiber Project” feature included in the AQ7933 OTDR Emulation
Software can be loaded into the instrument.
Note
• On the instrument, you can only create projects whose measurement conditions of all cores are the same.
“Multi-Fiber Project” can be used to create projects whose measurement conditions are different for each
core.
• To load a past project into the instrument, you need an MPJ file and an SOR file (data saved with the
project).
NoJudge Display
If an MPJ file of an older version is loaded, the file may contain core information whose event analysis has
not been executed even when pass/fail judgment is set to ON. If this occurs, you can turn off the display of
pass/fail judgment setting once and then turn it back on so that pass/fail judgment is executed again on the
measured data and pass or fail is indicated.
8.2 Measuring a Multi-Core Optical Fiber Cable (Multi-Fiber Project)
