YOKOGAWA AQ1210D User Manual Download

Page: 180 / 290

8-6

IM AQ1210-01EN

Map Display of the Measurement Results

Relative position of the event

Distance

between events

Displays the event type with an icon

Distance from start point S

Event number

The icon display method

is the same as the display

in MAP mode of event

analysis in section 1.4.

Event information display

See “Event Analysis” in

section 1.4.

View and edit waveforms

in trace mode.

Viewing and Editing Waveforms in Trace Mode

Tap the

TRACE

MAP

button to set the data display screen to TRACE mode.

A waveform view/edit screen appears.

Waveform View/Edit Screen

Event information display

See “Event Analysis” in

section 1.4.

Composite waveform

display

Waveform section

for pulse width 20 ns

Waveform section for

pulse width 500 ns

Waveform section

for pulse width 20 µs

8.1 Displaying a Map of the Line Configuration and Events (OTDR Smart Mapper)

Summary of Contents for AQ1210D



































































































































































































































































































Search results

Summary of Contents for AQ1210D

Reviews:

Related manuals for AQ1210D

Brands by name

Popular brands

YOKOGAWA AQ1210D, User Manual

Search results

Summary of Contents for AQ1210D

Reviews:

Related manuals for AQ1210D

Brands by name

Popular brands