YOKOGAWA 2553A User Manual Download Page 89

Page: 89 / 146

11-1

IM 2553A-01EN

Commands

App

Index

Chapter 11 Commands

11.1 List of Commands

Command

Function

Page

COMMunicate Group

:COMMunicate?

Queries all communication settings.

11-3

:COMMunicate:HEADer

Sets or queries whether headers are attached to query responses.

11-3

:COMMunicate:LOCKout

Sets/clears local lockout.

11-3

:COMMunicate:REMote

Sets the 2553A to remote or local mode. On is remote mode.

11-3

:COMMunicate:VERBose

Sets or queries whether the response to a query is returned fully spelled out

or in its abbreviated form.

11-3

:COMMunicate:WAIT

Waits for a specified extended event to occur.

11-3

:COMMunicate:WAIT?

Creates the response that is returned when a specified extended event

Sets or queries the output’s on/off state.

11-4

:OUTPut:POLarity

Sets or queries the polarity.

11-4

SOURce Group

:SOURce?

Queries all source settings.

11-5

:SOURce:FUNCtion

Sets or queries the source function.

11-5

:SOURce:LEVel

Sets or queries the output setting.

11-5

:SOURce:RANGe

Sets or queries the voltage, current, or resistance range.

11-5

:SOURce:RJC?

Queries all reference junction compensation settings.

11-6

:SOURce:RJC:MODE

Sets or queries the reference junction compensation mode.

11-6

:SOURce:RJC:STATe?

Queries the reference junction compensation operating state.

11-6

:SOURce:RJC:TEMPerature?

Queries the reference junction compensation temperature.

11-6

:SOURce:RJC:TEMPerature:AUTO

Sets or queries the reference junction compensation temperature.

11-6

:SOURce:RJC:TEMPerature:EXTern

al?

Queries the external reference junction temperature.

11-7

:SOURce:RJC:TEMPerature:INTern

al?

Queries the 2553A’s internal reference junction (2553A output terminal)

temperature.

11-7

:SOURce:RJC:TEMPerature:MANual

Sets or queries the temperature for when the reference junction

compensation mode is set to manual input.

11-7

:SOURce:RJC:RESister?

Queries the resistance of the RJ sensor to be used for the external reference

junction for 0°C.

11-7

:SOURce:RTD?

Queries all user-defined RTD settings.

11-7

:SOURce:RTD:DEFine

Sets a user-defined RTD.

11-7

:SOURce:RTD:DELete

Deletes user-defined RTDs.

11-7

:SOURce:RTD:SETTing?

Queries all temperature range settings that are user-defined for the RTD.

11-7

:SOURce:RTD:TYPE

Sets or queries the type string for distinguishing user-defined RTDs.

11-8

:SOURce:RTD:WRITe

Writes a user-defined RTD.

11-8

:SOURce:SLEVel

Sets or queries the output setting with polarity information.

11-8

:SOURce:TCouple?

Queries all user-defined thermocouple settings.

11-8

:SOURce:TCouple:DEFine

Sets a user-defined thermocouple.

11-9

:SOURce:TCouple:DELete

Deletes user-defined thermocouples.

11-9

:SOURce:TCouple:SETTing?

Queries all temperature range settings that are user-defined for the

thermocouple.

11-9

:SOURce:TCouple:TYPE

Sets or queries the type string for distinguishing user-defined thermocouples. 11-9

:SOURce:TCouple:WRITe

Writes a user-defined thermocouple.

11-9

:SOURce:TYPE

Sets or queries the thermocouple or RTD type.

11-9

STATus Group

:STATus?

Queries all the settings of the communication status feature.

11-10

:STATus:CONDition?

Queries the contents of the condition register.

11-10

:STATus:EESE

Sets or queries the extended event enable register.

11-10

:STATus:EESR?

Queries the contents of the extended event register and clears the register. 11-10

:STATus:ERRor?

Queries the error code and message of the last error that has occurred (top

of the error queue).

11-10

Summary of Contents for 2553A



















































































































































Search results

Summary of Contents for 2553A

Reviews:

Related manuals for 2553A

Brands by name

Popular brands

YOKOGAWA 2553A, User Manual

Search results

Summary of Contents for 2553A

Reviews:

Related manuals for 2553A

Brands by name

Popular brands