8-4
IM 2553A-01EN
8.3 Configuring the 2553A Ethernet Settings
Setting the IP Address, Subnet Mask, and Default Gateway
4.
Turn an
output setting
dial to select IP (IP address), MASK (subnet mask), or GATE (default
gateway).
5.
Flip the
POLARITY
switch down.
Of the four octets of the IP, MASK, or GATE, the first octet appears.
Output setting dials (use any)
POLARITY switch
5. Display the first octet of the four
octets of the IP, MASK, or GATE.
4. Select IP, MASK, or GATE.
6.
Turn the right-most
output setting
dial to select the octet number (1 to 4) you want to set.
7.
Turn the three
output setting
dials to set the selected octet value.
8.
Repeat steps 6 and 7 to set the four octets.
9.
Flip the
POLARITY
switch down.
The IP, MASK, or GATE setting is confirmed.
Output setting dials (three)
POLARITY switch
9. Confirm the IP, MASK,
or GATE setting.
7. Set the value of the selected
octet.
8. Repeat steps 6 and 7.
Right-most output setting dial
6. Select the octet number you
want to set.
Displays the octet number
Displays the octet value of IP,
MASK, or GATE
