Yoda VG400R, User Manual

Page: 79 / 86

Warning
The average bandwidth for each channel is from
12kbps to 16kbps by default. In a heavy traffic
network, the available bandwidth between two
nodes may affect the voice quality.
7.2 VG to VG in the Dynamic IP Address
Environment
The previous section shows the steps regarding how to set up a
typical VG-to-VG connection in the static IP address
environment without modifying any settings. This section we
will show you how to connect two VGs in a dynamic IP address
environment via built-in PPPoE, DHCP, and DDNS clients.
Assume there is another VG, say VG B, located at Site B with
default settings. First of all, it is required to apply for a DDNS
host name from http://www.dyndns.org for VGs at Site A and
Site B. (For example, the names are
mary01.dyndns.org for VG
at Site A, and mary02.dyndns.org for VG at Site B.)
mary01.dyndns.org is applied for VG at Site A,
mary02.dyndns.org is applied for VG at Site B.
Other parameters associated with this topology are:
VG at Site A has PPPoE , and DDNS clients enabled
VG at Site B has DHCP , and DDNS clients enabled.
The network topology can be shown as follows:
75