Yoda VG400R, User Manual

Page: 74 / 86

Now let’s make a call to your extension. Pick up the handset
connected to the FXS port and dial ‘
201 ’, you should hear a dial
tone (This means that ITG picks up the line connected to your
PBX). Then dial
‘100 ’, your extension handset should ring right
away.
L
Hint
This guide only uses the default values. Once you
are familiar with the dial plan set up, you may
design your own. You may set it up with only one
digit if you wish, say ‘
1 ’, and ‘ 100 ’ rings.
VG-400R to VG-400R in the Static IP Address
Environment
The previous section shows you how to test your VG400R
without modifying any settings. This section will show you how
to connect two VGs together and make VoIP calls.
Assume that we have another VG, say VG B, with the default
settings as well. Now, let’s set up the IP address of VG B to,
e.g. ‘192.168.0.2’ and connect it to VG A with the following
three steps.
Step 1.
VG B:
Console> net set ip 192.168.0.2 <enter> and restart VG
B
Step2.
Connect VG A and VG B to the same Ethernet switch or hub.
Step3.
VG A:
Console> ping 192.168.0.2 <enter> ; ping VG B
Ping (192.168.0.2) 56 data byte
192.168.0.2 is alive
70