background image

CONTENTS

MUST READ-1

All Units Shall Be Installed by Experienced or Licensed Contractor Or 

Technician. Read Manuals before Installation.

YMGI Group Shall NOT Take Any Responsibilities for Any Damage or 

Loss Due to Do-It-Yourself(DIY) self-installation and other Improper Installation or Operation or 
Natural Disaster.

Connect All Wiring Securely. Loose Wire or Other Bad Contact May Cause 

Arc or Overheating and Fire Hazard.

Following NEC, State and Local Codes and Installation Instructions of All 

Units, Otherwise Unit Warranty Will Be Void and Serious Damage To People Or Property May Be 
Caused.

Don't Supply Power until All Wiring and Tubing and Checking is 

Completed. Ground the Unit Following Instructions and NEC, State and Local Codes.

P2 OF 44

P1 OF 44

INTRODUCTION

NAMES OF PARTS

UNIT SPECIFICATIONS

RECOMMENDED TOOLS FOR INSTALLATION

INSTALLATION NOTES

INSTALLATION ACCESSORIES

INSTALLATION CLEARANCE

INDOOR UNIT INSTALLATION

WIRING DIAGRAMS

TEST AND CHECK ITEMS AFTER INSTALLATION

SAFETY CAUTIONS

OPTIMUM OPERATION

TROUBLE SHOOTING

CARE AND MAINTENANCE

WARRANTY AND TECH. SUPPORT

LIMITED PRODUCT WARRANTY POLICIES

LIMITED PRODUCT WARRANTY REGISTRATION CARD

8

9

10

11

12

13

13

14

19

21

22

23

27

28

35

37

4

2

5

43

CUSTOMER AND TECHNICIAN MUST READ

6

7

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

YMGI, Engineered Comfort Products for A Sustainable and Efficient Green World !

REMOTE CONTROL-BUTTON NAME & FUNCTIONS

USER NOTES AND INSTALLATION/SERVICE/MAINTENANCE NOTES

WELCOME AND PLEASE READ THROUGH MANUALS

WELCOME AND PLEASE READ THROUGH MANUALS

INSTALLING TECHNICIAN/CONTRACTOR'S JOBS AND RESPONSIBILITIES

Toll Free Number: (866)833-3138
Email: [email protected]

If you have any questions about your unit or even doubt if the unit has any problem, you can first check against 
the mannds. If you can not find answers, then you can contact your local installer or service technician to 
physically inspect the unit.  If at the time of inspection the installer or service technician have any questions they 
can contact YMGI technical support division directly at:

Dear Customer(s)/end User(s)/unit Purchaser(s)/installer(s)/Contractor(s):

Thanks for choosing YMGI products.

The YMGI equipment you purchased is either a split-type or a self-contained cooling/heating system which 
requires an installer's license, certification, knowledge, experience, carefulness and details for a successful and 
good installation. This equipment is different from those window or portable air conditioners you can normally 
purchase from local retail stores such as Home Depot, Lowe's, Sears, etc. which the manufacturer may not 
require licensed personnel to install. 

Reading and following the YMGI Group's recommendations, suggestions, and requirements, written in the 
following pages and other documents, is the first step to ensuring a smooth and trouble free installation & proper 
operation of your products for many years to come.

YMGI Group, POB 1559, O'Fallon, MO 63366 is the only party who holds the final explanation (in authorized 
writing) about any descriptions or data in YMGI-published materials, including but not limited to 
YMGI product brochures, manuals, pamphlets, catalogs, videos and any other media. YMGI's distributors, 
installers, dealers, agents, customers or any other third parties shall not supersede YMGI to make any 
explanation about what YMGI-published materials mean. Any uncertainty or questions, arising from YMGI 
distributors, installers, dealers, agents, customers or any other third parties, should be passed directly to YMGI 
for an explanation in writing.

IMPORTANT NOTE-YMGI HOLDS FINAL EXPLANATION:

The quality of the installation plays a key role in whether the units will work well and for an extended period of 
time. The information we provide in our manuals is for the sole purpose of reminding you and your installer.

It is our ultimate goal to help insure that your YMGI units are installed properly and correctly from the very 
beginning to the very end. This ensures that your YMGI units will work well and not only provide a comfortable 
room but also peace of mind.   

YMGI doesn't recommend nor allow any do-it-yourself (DIY) installation (partially or fully), since DIY will cause 
problems sooner or later to your units and your upfront saving is Not saving down the road.

YMGI warranty doesn't cover any DIY units.

Summary of Contents for WMMS-12EC-V2B
























Reviews: