YMGI
•
Your Modern Green Idea
31
5.
Timer button
:
When the unit is ON, press this button to set
Timer Off
. "
OFF" will be displayed. Press the
HOUR button to set the time for Timer Off. Hours can be set from 1H to 12H. Press TIMER button
again will cancel Timer Off.
6. When unit is OFF, press this button to set
Timer On
. "
ON" will be displayed. Press the HOUR
button to set the time for Timer On. Hours can be set from 1H to 12H. Press TIMER button again will
cancel Timer On.
7.
°C / °F button:
Press this button to choose Fahrenheit or Centigrade temperature.
8.
HOLD button:
Press this button to lock or unlock other buttons except the ON/OFF button of the
remote controller.
Present clock setting
When batteries are installed, the present time is AM 0:00. Open the back cover, push the CLK button. The
time indicator will blink so you can set the present time.
1. Press HOUR button to set hour.
2. Press MIN button to set minute.
3. Press CLK button again to save settings and close the back cover.
Operation guide
1. After putting
through the power, press “ON/OFF” button on the remote controller to turn on the air
conditioner.
2.
Press “MODE” button to select your required mode.
3.
Press “+” or “-“ button to set your required temperature.
4. Press FAN SPEED button to set your required fan speed.
Replacement of batteries in remote controller
1. Press and pull the back cover to open it.
2. Replace two No.7 (AAA 1.5V) dry batteries and make sure the positions of + and - poles are correct.
3. Reinstall the back cover.
NOTICE
1. During operation, point the remote control at the receiving window on the control panel.
2. The distance between signal sender and receive window should not be more than 8 meters, and there
should be no obstacles between them.
3. Remote control can experience signal interference in rooms where there are fluorescent lamps or
wireless telephones. Remote controller should be close to indoor unit during operation.
4. Replace new batteries of the same model when replacement is required.
5. When remote control will not be used for prolonged periods, remove the batteries to avoid potential
corrosion damage to the remote.
6. If the display on remote controller appears fuzzy or the display does not show any icons, please
replace batteries.
Summary of Contents for TTWA Series
