YMGI
•
Your Modern Green Idea
30
3. Control shift between 24V General Thermostat and Control Panel
Under standby mode, press MODE and UP buttons at the same time for 3 seconds, the buzzer will
chime and LED will display or
: unit is controlled by control panel, the buzzer chime once.
: unit is controlled by 24V general thermostat, the
buzzer chime twice.
4. LS Control
(
Front
-
Desk Control
)
It is suggested to use the normal open button to control.
a.
Turn ON unit:
Press the normal open button then
release for once within 5 seconds.
b.
Turn OFF unit
: Press the normal open button then release for twice within 5 seconds.
IR remote controller operation guide:
1.
When power is connected (standby condition), you can operate the air conditioner through the remote
controller.
2.
When unit is on, each time you press a button on remote controller, the sending signal icon "
" on the
display will blink once. If the air conditioner gives out a beep sound, it means the signal has been
received.
3.
This is a general use remote controller, it could be used for the air conditioners with multifunction. For
some functions that the model doesn't have, if press the corresponding button on the remote controller,
the unit will keep the original running state.
1.
ON/OFF button:
Press this button to turn unit ON/OFF.
2.
MODE button:
Pressing this button once can select your required mode. It will cycle as bellow:
When selecting cool mode
, air conditioner will operate under cool mode. Then press + or -
button to adjust temperature.
Press FAN SPEED button to adjust fan speed.
When selecting heat mode
, air conditioner will operate under heat mode. Then press + or -
button to adjust temperature.
Press FAN SPEED button to adjust fan speed. (Cooling only unit will not respond when it receives
the heating signal.)
When selecting fan mode
, air conditioner will operate under fan mode. Press FAN SPEED
button to adjust fan speed
3.
+/- button:
Pr or - button once will increase or decrease set temperature by 1 degree °
C /
°
F
4.
Fan speed button:
Pressing fan speed button selects the fan speed in a cycle, as: high (
), low
( ), and auto (indicated by the
icon flashing).
NOTE:
under AUTO speed, air condition will select proper fan speed automatically according to
ambient temperature.
Summary of Contents for TTWA Series
