YILMAZ PCC 6505, Manual

Page: 55 / 87

55
elevated (P21) !..

If the piston is open, sensor may not
detect the piston.
A29 Width measuring piston not opened
(P22) !..


Piston may not open completely.

If the piston is open, sensor may not
detect the piston.
Check valve of the piston or sensor.
A34 Saw Z Servo Fault !.. Servo may produce error due to any
kind of overload. Reset the alarm on the screen.
A35 Saw Servo Fault !.. Servo may produce error due to any
kind of overload. Reset the alarm on the screen.
A36 Robot X Fault !.. Servo may produce error due to any
kind of overload. Reset the alarm on the screen.
A37 Robot Y Fault !.. Servo may produce error due to any
kind of overload. Reset the alarm on the screen.
A38 Robot Z Fault !.. Servo may produce error due to any
kind of overload. Reset the alarm on the screen.
A39 Stopped as profile not loaded !.. The process in the cutting list is
completed. Continue processing after loading a
new working list.
A40 Data not downloaded from database
!.. The process in the cutting list is
completed. Continue processing after loading a
new working list.
A41 Outlet conveyor pulley not elevated
!..


Piston may not be elevated
completely

If the piston is open, sensor may not
detect the piston
Check valve of the piston or sensor.
A42 Claw not turned to vertical position
(P15) !..


Piston may not turn into vertical
position completely
If the piston is open, sensor may not
detect the piston
Check valve of the piston or sensor.
A43
Claw not turned to horizontal
position (P15) !..

Piston may not turn into horizontal
position completely.

If the piston is open, sensor may not
detect the piston.
Check valve of the piston or sensor.


Claw piston may not open
completely.