V2.3.0 OM-UNN valid from 15
th
April 2015
14
2.4.1
Connecting to the Waste Tank
This operation must be performed when either the instrument is or in standby mode.
Note
To ensure the instrument’s normal operation, the cap of the waste tank must be screwed on tightly to ensure
an air-tight condition, or it will active the pressure sensor.
2.4.2
Connection to a Waste Disposal Drainage
This operation must be performed when either the instrument is switched off or in stand-by mode.
Connecting the waste output of the instrument to the drainage should be handled with care.
Biohazard
The waste tank potentially has biohazardous condition, please following the standard operation and safety
practices when you pour out.
2.5.
Electrical Connection
The power plug is located at the back of the instrument. The instrument must be connected to a power
socket as specified in this operating manual and follow the safety requirements.
Fig. 2-3 Backside of UNION
No.
Description
No.
Description
A
Fan 1
B
Fan 2
C
Power code port
D
Power plug
E
USB port
F
Waste port
G
Waste port
