V2.3.0 OM-UNN valid from 15
th
April 2015
6
1.1.3.
Output Unit
The output unit is a printer that prints out the test results and other data.
1.2.
Software introduction
Note
In this manual, “click” refers to moving the pointer of the mouse to the desired item and click the left button
of the mouse.
1.2.1
Software Interface
The main window of the operating software is as shown in the figure below.
Fig.1-9 Main interface
1.2.2
Status Bar
The status bar located as Part “A” at the left side of the screen as shown in Fig. 1-9 is referred to as the
instrument(s) status position.
When several analyzers are connected, the status of all the instruments will be displayed by its own icon
button indicating the followings:
Instrument serial number
Error display
Status (Either to be checked, Error or Ready messages will be displayed.)
Click on the specific instrument icon button, the user is directed to the Maine Operation Window of the
specified instrument.
