Yetter 5000-025C, Owner'S Manual

Page: 32 / 52

32
5000-034B ASSEMBLY INSTRUCTIONS
(JD 612FC, 712FC, & C12F)
Step 1: Attach the 5000-202 mount brackets to the frame between rows 4 & 5, 5 & 6, 7 & 8, and 8 & 9 using the 5/8 x 6 bolts,
mounting straps, &
5/8” lock hex nuts. Attach the 5000-263 mount brackets to the frame between rows 1 & 2, 2 & 3, 10 & 11,
and 11 & 12. The 5000-263 mounts between rows 1 & 2 and 2 & 3 will use 5/8 X 6 bolts, mounting straps, &
5/8” lock nuts. The
5000-263 mounts between rows 10 & 11 and 11 & 12 will each use 3) 5/8 X 6 bolts & 1) 5/8 X 6 Carriage bolts (1 used on the
top left of each mount on these rows), mounting straps, and
5/8” lock nuts. Slide the mount bracket up so the deck plate
adjustment rod is located in the cut out of the mount bracket.
Note: Do not fully tighten hardware until Step 6 after all of the pivot arms & springs are installed.
6 Center Rows Outside 3 Rows
Arrows indicate 5000-202 mount bracket locations, mounts will go on front side of frame, straps on back side of frame.