Yetter 5000-025C, Owner'S Manual

Page: 26 / 52

26
5000-028C ASSEMBLY INSTRUCTIONS
(JD 616C, 716C, C16F, & C16R)
Step 1: Attach the 5000-202 mount brackets to the frame using the 5/8 x 6 bolts, mounting straps, &
5/8”
lock hex nuts. Mounting Brackets will be located under the snouts between rows 1 & 2, 2 & 3, 4 & 5, 5 &
6, 7 & 8, 8 & 9, 10 & 11, and 11 & 12. Slide the mount bracket up so the deck plate adjustment rod is
located in the cut out of the mount bracket.
If corn head is equipped with protective shield (like pic with
the arrow shows), you can either: remove each shield, cut a notch in each shield, or bend each shield
upwards to gain clearance. The shields on a 90 series head will need removed.
Note: Do not fully tighten hardware until Step 6 after all of the pivot arms & springs are installed.
Arrows indicate 5000-202 mount bracket locations, mounts will go on front side of frame, straps on back side of frame.