11
5000-025C ASSEMBLY INSTRUCTIONS
(606C, 643, 693, 706C, C6R or Wheel Track only on 12 & 16 row JD corn heads)
Step 1:
Attach the 5000-202 mount brackets to the frame using the 5/8 x 6 bolts, mounting straps, and
5/8” lock hex nuts.
Mounting Brackets will be located under the snouts between rows 1 & 2, 2 & 3, 4 & 5, and 5 & 6. Slide the mount bracket up so
the deck plate adjustment rod is located in the cut out of the mount bracket.
. If corn head is equipped with protective shield
(like pic with the arrow shows), you can either: remove each shield, cut a notch in each shield, or bend each shield upwards to
gain clearance. The shields on a 90 series head will need removed.
Note:
Do not fully tighten hardware until
Step 6
after all of the pivot arms & springs are installed.
6 Row
Arrows indicate 5000-202 mount bracket locations, mounts will go on front side of frame, straps on back side of frame.
12 Row Wheel Tracks
Arrows indicate 5000-202 mount bracket locations (rows 3/4 & 4/5 and 8/9 & 9/10 could also be used)
16 Row Wheel Tracks
Arrows indicate 5000-202 mount bracket locations (rows 5/6 & 6/7 and 9/10 & 10/11 could also be used)
Summary of Contents for 5000-025C
