Yetter 5000-025C, Owner'S Manual

Page: 21 / 52

21
5000-027C ASSEMBLY INSTRUCTIONS
(JD 612C, 712C, 1243, 1293, & C12R)
Step 1: Attach the 5000-202 mount brackets to the frame using the 5/8 x 6 bolts, mounting straps, &
5/8” lock hex nuts.
Mounting Brackets will be located under the snouts between rows 1 & 2, 2 & 3, 4 & 5, 5 & 6, 7 & 8, 8 & 9, 10 & 11, and 11 &
12. Slide the mount bracket up so the deck plate adjustment rod is located in the cut out of the mount bracket. On JD 1293
corn heads, use the 5000-301 L Clamp Plate with the mounting brackets between rows 2 & 3 and 10 & 11. If corn head is
equipped with protective shield (like pic with the arrow shows), you can either: remove each shield, cut a notch in each shield,
or bend each shield upwards to gain clearance. The shields on a 90 series head will need removed.
Note: Do not fully tighten hardware until Step 6 after all of the pivot arms & springs are installed.
Arrows indicate 5000-202 mount bracket locations, mounts will go on front side of frame, straps on back side of frame.