12
maintenance
maintenance
maintenance
Following these guidelines will help maintain the performance of your bicycle and prevent
more serious problems from arising. it is important to remember that service intervals can vary depending
on climate, trail conditions, and riding frequency.
Caution:
The torque specifications listed should be used as a guide when performing maintenance. Technological
advances have made bicycles and bicycle components more complex, and the pace of innovation is increasing.
Because of these advances, YETI recommends that you refer to the torque specifications of the manufactures
component you are adjusting. In order to help minimize the chances of an injury, do not perform any maintenance that
you are not confident can be completed within your abilities.
maintenance?
not sure how to work on your own bike?
Contact your authorized Yeti dealer or visit www.parktool.com
and check out the repair help section. this section contains
detailed instruction on many of the service items listed in the
maintenance schedule.
tOrque
We have attached a brief list of torque specifications for bolts and components that may need to be
tightened while performing basic maintenance. this is just guide. For specific torque specifications, please
contact the component manufacturer directly.
tOrque sPecs
swingarm pivot pins
40
-
50
stabilizer pinch Bolts
40 -50
titanium pivot Bolts
125 -150
pivot pins
125 - 150
through axle Bolts
125 -150
Cable Guide screws
10 -15
Derailleur hanger Bolts
30 -45
handlebar Binder Bolt
150 -180
stem Binder Bolt
175 -260
seatpost Binder Bolt
150 -180
saddle Clamp Bolts
175 -250
rear Derailleur
70 -86
Chainring Bolts
88 -132
actiOn
every riDe
mOnthly
3 mOnths
annually
lube linear block (see page 14)
x
Clean and lube chain
x
Check tire pressure
x
Clean bike of mud and debris (never
spray water directly into frame or
components)
x
Check shock pressure
x
Check for loose bolts and tighten if
necessary
x
Check headset and tighten/loosen if
necessary
x
thoroughly clean pivot points with a
rag (do not lubricate)
x
replace brake pads if necessary
x
Check tires for wear
x
Check spoke tension, and retention if
necessary
x
Check chain for worn, damaged, or
loose links. replace chain if necessary
x
Complete tune-up performed by an
authorized Yeti dealer
x
