38
main assembly Cont.
assembly
main assembly
slide the axle insert in the outside face of the rear
drops as shown, Make sure the flanged end of the insert is facing
outwards. repeat for the opposing side.
main assembly
screw M6x1x12 ti Male Bolt and axle Cap onto the
12mm x 150mm axle. Make sure to apply ti prep to the threads.
torque spec: 125-150 inch/pounds.
main assembly
secure the lower shock mount to the swingarm
using the M5x.8x12 and M5x.8x14 socket cap head bolts. the shorter
of the two bolts the M5x.8x12 is used for the upper mounting hole and
M5x.8x14 is used for the lower mounting holes. remember to use loctite on
the threads and tighten using a 4mm allen key.
torque spec: 125-150 inch/pounds.
main assembly
now you can fully torque the lower shock mount
bolt that was only temporarily secured from the shock subassembly.
Use two 5mm allen keys to tighten.
torque spec: 125-150 inch/pounds.
43
44
41
42
main assembly
Use two 5mm allen keys and tighten the axle down.
torque spec: 125-150 inch/pounds.
main assembly
tighten the pinch bolts on the dropouts using a
5mm allen key. repeat for the opposing side.
torque spec: 125-150 inch/pounds.
main assembly
slide the axle subassembly into the frame as
shown. Use either your wheel or the spacing tube shipped with the
frame as the 150mm rear wheel spacing.
main assembly
screw M6x1x12 ti Male Bolt and axle Cap onto the
axle. Make sure to apply ti prep to the threads.
47
48
45
46
